Fish Supplies

The Lifegard Aquatics Digital Clock and Aquarium Thermometer is a digital clock/thermometer with an illuminating light. This product accurately measures tank water or room temperature in Fahrenheit or Celsius. It includes a 3 foot cord with an all plastic probe and suction cup.

Features:

·         Digital thermometer for fresh or saltwater aquariums

·         Accurately measures aquarium water in Fahrenheit or Celsius

·         Place temperature probe in aquarium to measure water temperature

·         For salt or freshwater use

Item Specifications:

Dimensions:

4.5" x 1" x 0.75"

Caution:

·         Do not submerge meter or allow meter to get wet

·         Damage may occur

Operating Instructions:

·         Remove protective sticker from face of thermometer

·         To install battery slide battery door open and insert battery in polarity direction as indicated

·         To Set Clock

·         Slide switch to "Clock" position

·         Press and hold "HR" button for 3 seconds. Hour numbers will advance to desired hour

·         Press and hold "MIN" button for 3 seconds. Minute numbers will advance to desired minutes

·         Slide switch to "TEMP" position after setting clock

·         Clock: To read time, press and hold "CLOCK" button. Release and display will return to temperature mode

·         To Set °C or °F: Slide switch up for °C or down for °F

·         Back Light: Press and hold "LIGHT" button

·         Water or Air Temp: Slide switch up to "AIR" to measure room temperature

·         Slide switch down to "WATER" to measure aquarium water temperature

·         Place Probe with Suction Cup inside aquarium or wet/dry filter

·         Probe must be fully submerged underwater