Hydor H2 Shoe Stump Kit
The Hydor H2 Show Stump Kit works great for enhancing aquarium style and water quality at the same time. This kit comprises of aquarium decoration, brilliant LED light and aeration. This kit provides a stylish way to produce bubbles that aerate your aquarium besides enhancing the beauty of your aquarium. It increase water flow, improves oxygen level and water clarity within your aquarium. This kit hides a compact bubble maker and LED light within its decoration. It is easy to position, is energy saving and releases oxygen and produces a spectacular flow of bubbles without an air pump.
Combines decoration and aeration in one kit
Enhances beauty of your aquarium
Improves water quality and oxygen level
Eye-catching décor with colored LED
Simple and easy to install
Unwind the electrical cord and the air intake tube.
Connect the air intake tube to the air pump chamber.
Position the air pump in the aquarium. For perfect stability, cover the base with gravel. In order to prevent noise and disturbance caused by vibrations, position the pump so it does not come in contact with the aquarium wall or other objects.
Fix the electrical cord, joined to the air intake tube, to the aquarium base and side using the supplied suction cups.
Cut the air intake tube so that it extends at least 1-1/2" from the aquarium frame and then insert air control valve.
Plug the Hydor Bubble Maker into the electrical supply.
NOTE: Verify that all components of the air pump are undamaged. Always operate the air pump underwater. Running the pump dry will cause structural damage to the rotor. Install the product at the suggested depth to prevent accidental damage or limited functioning.
Regular cleaning and maintenance of the air pump will ensure better performance and durability. Before any kind of maintenance, always disconnect the air pump.
Detach the light assembly and gently wipe the protective cover.
Separate the Channeled Bubble Maker Casing from the Bubble Maker body and remove the rotor.
Clean the rotor of lime scale with a soft, nonmetallic brush.
Rinse thoroughly with lukewarm water and re-assemble components. Make sure the rotor is properly positioned in place.
Do not use solvents or detergents.
6" L x 4.5" W x 4" H