Ships to Canada
Hydor H2 Show Deluxe Multicolour Crystal Kit
The Hydor H2 Show Deluxe ColorMix Crystal Kit helps you create dazzling underwater scenes in your aquarium. The kit features a detailed aquarium ornament, color-changing LED and bubble maker which combine to enhance aesthetics and water quality of your aquarium. The cleverly hidden bubble maker generates a flurry of air bubbles that improve water quality. A dramatic column of sparkling air bubbles streams out of the decoration to provide oxygen rich water. The multicolor LED automatically alternates from blue, red and green light every nine seconds to bathe the dancing air bubbles with crisp colored light. The result is an impressive display that takes aquarium décor to a new level of aesthetic enhancement.
Ensures even aeration of aquarium
Enhances aesthetics and water quality
Color changing LED adds dynamic light effects
Easy to install
Unwind the electrical cord and the air intake tube.
Connect the air intake tube to the air pump chamber.
Position the air pump in the aquarium. For perfect stability, cover the base with gravel. In order to prevent noise and disturbance caused by vibrations, position the pump so it does not come in contact with the aquarium wall or other objects.
Fix the electrical cord, joined to the air intake tube, to the aquarium base and side using the supplied suction cups.
Cut the air intake tube so that it extends at least 1-1/2" from the aquarium frame and then insert air control valve.
Plug the Hydor Bubble Maker into the electrical supply.
NOTE: Verify that all components of the air pump are undamaged. Always operate the air pump underwater. Running the pump dry will cause structural damage to the rotor. Install the product at the suggested depth to prevent accidental damage or limited functioning.
Regular cleaning and maintenance of the air pump will ensure better performance and durability. Before any kind of maintenance, always disconnect the air pump.
Detach the light assembly and gently wipe the protective cover.
Separate the Channeled Bubble Maker Casing from the Bubble Maker body and remove the rotor.
Clean the rotor of lime scale with a soft, nonmetallic brush.
Rinse thoroughly with lukewarm water and re-assemble components. Make sure the rotor is properly positioned in place.
Do not use solvents or detergents.
4" L x 3.5" W x 5" H