Kent Marine pH Control Plus
Exertive and potent, Kent Marine pH Control Plus is a powerful solution that aptly increases the Phosphorus levels in water. Manufactured for aquarium as well as marine water, this solution possesses a unique formula stirred to regulate Phosphorus. This solution can be administered in salt water, alkaline, brackish and fresh water. It is mandatory that you measure the alkaline level in water before you administer this solution. An overdose can cause harm the water as well as the aquatic life. You need to add 1/8 teaspoon of Kent Marine pH Control Plus to three cups of water. Then this solution has to be dispensed in 20 gallons of water. This is a highly concentrated solution, thus it is advised that you administer small doses. A high dosage can stimulate unstable Phosphorus levels. Kent Marine pH Control Plus is recommended by veterinarians and is required to maintain clean and healthy water for aquatic life.
- For fresh water and salt water
- Increases Phosphorus levels
- Administer 1/8 teaspoon for 20 gallons of water
- Can be used with other medicating solutions
2.2" L x 2.2" W x 2.5" D
First, measure alkalinity (buffering capacity, carbonate hardness, or KH) and adjust to the appropriate level. Next, adjust and raise pH by drawing 3 cups of aquarium water in a separate clean container, add 1/8 teaspoon of KENT Marine pH Control Plus, and mix well. Disperse this amount into the aquarium for every 20 gallons of water. Wait 24 hours for the pH to stabilize and adjust further, as needed.
This is a concentrated product! When in doubt, less is better. It is recommended only to adjust the pH up 0.2 pH per day.
When using Reverse Osmosis water or tap water that is very soft (low total or general hardness, or GH), use
KENT Marine R/O Right to increase total dissolved solids (GH) to the proper value.
To adjust alkalinity (buffering capacity) use KENT Marine Superbuffer-dKH or KENT Marine pH Stable.